46th TWC, Tob. Work. Conf., 2014, abstr. 02 Organic tobacco: a growers perspective CARTER B. Carter Farms, NC, USA Reference only. Abstract submission was on a voluntary basis....
CORESTA Meeting, Smoke/Technology, Hamburg, 1997, ST36 Smoking machine with integrated CO measurement WINTER R.; KLUSS B. Heinr. Borgwaldt Technik GmbH, Hamburg, Germany CORESTA Recommended Method Nº 5 as well as ISO 8454 describes the determination of vol.% CO in the gas phase and the calculation of mg CO per cigarette. Three steps are needed to get to the final result:1. Gas phase collection during smoking; 2....
CORESTA Meeting, Smoke/Technology, Hamburg, 1997, ST02 Determination of hot collapse on filters and cigarette rods performed with a new device BLÖCKER K. Heinr. Borgwaldt Technik GmbH, Hamburg, Germany The hot collapse (HC) both on filters and on tobacco rods during smoking (HDS) is of great importance when developing new cigarettes. Already in 1988 a CORESTA task force had investigated the matter. The results of the study including some...
CORESTA Meeting, Smoke/Technology, Hamburg, 1997, ST15 Cigarette factory primary process emissions survey GIBBINS B. GBE Environmental Engineering, GBE House, Andover, Hants, UK There is increasing world-wide interest in the control of emissions from cigarette and tobacco processing factories. At the 1996 CORESTA Congress a paper was presented detailing the findings of a survey conducted to establish the elements likely to...
Bull. Spec. CORESTA Congress, Yokohama, 1996, p. 197, ST10 Cigarette factory - Primary process emissions survey MITCHELL D. GBE Environmental Engineering, GBE House, Andover, Hants, UK There is increasing worldwide interest in the control of emissions from cigarette and tobacco processing factories. This paper presents the findings of a survey conducted to establish the elements likely to be contained in vapour extracted from...
Bull. Spec. CORESTA Congress, Yokohama, 1996, p. 222, T3 De-odorisation of exhaust gases from tobacco processing GIBBINS B. GBE Environmental Engineering, GBE House, Andover, Hants, UK This paper briefly describes the various methods employed for the removal of odours from gases and describes in detail a two stage chemical scrubber unit installed at a tobacco/cigarette process factory. This paper discusses and compares the actual...
CORESTA Meeting, Smoke/Technology, Vienna, 1995, ST44 New, fully automatic smoking machine conforming to ISO 3308 KLUSS B. Heinr. Borgwaldt Technik GmbH, Hamburg, Germany After ISO 3308 and ISO 4387 were revised in 1991, the idea of a fully automatic Smoking Machine was again taken up. A concept was drawn up in co-operation with the cigarette industry to act as the basis for the development. Here, special emphasis was...
CORESTA Meeting, Smoke/Technology, Budapest, 1993, ST 23 Determination of filling power with a new instrument KLUSS B. Heinr. Borgwaldt Technik GmbH, Hamburg, Germany To determine the filling power of cut rag tobacco, a new instrument with a big (1.5 l) tobacco container was developed. With this device, the influence of loading time, load, lowering speed and weight of sample on the filling power was determined....